Characteristics of single folding door with wide frame in Jinbaihe(wide frame 55mm)：
Completely open but you need to determine the open direction before installation and no change after installation. After opening the first glass,you can optionally move any other glass to open any locational space.
The moving mode of single folding door with wide frame in Jinbaihe(wide frame 55mm)：
Each piece of glass is a movable unit, which is pushed to a fixed folding opening position and opened inside.
The stress mould of single folding door with wide frame in Jinbaihe(wide frame 55mm)：
Load bearing mode,the left end and right end of each piece of glass of the bearing wheel, each piece of glass
has four bearing wheels and one positioning wheel, so that the window sash will not jump when opening the gap.Four wheels on each wheel are acting on the track at the same time.
The sealing way of single folding door with wide frame in Jinbaihe(wide frame55mm):
Aluminum alloy U-type insert and external anti-collision sealant are used between fan and fan.
The patented anti-backup fan structure solves the technical problem of single folding door, the glass width is 800MM, the short approach bridge does not turn the fan, and the 90 degree corner. Choose the
lower rail of 15mm height, suitable for indoor partition without mixing feet.
The low sill track is suitable for the break between sitting room and sitting room with the high of 3M.The high sill track can also be used as a window. General practice is below the railing with frameless push pull flat window, railing above is a single folding fully